Materials and Process Engineering Subject regulations
The Materials and Process Engineering programme covers a wide range of skills and contains two engineering disciplines that overlap in many areas. The materials engineer makes critical decisions in selecting the best materials for a particular function; the process engineer makes critical decisions in the processes and utilities required to manufacture the product. For example, materials engineering involves understanding the properties and uses of wood and steel, designing and constructing new filters for sewage treatment, and providing new materials for the energy industry. Process engineering include converting trees into paper and fibre board, iron sand into steel, effluent into drinkable water, and gas into electricity.
Materials and Process Engineering is available as a specified programme for the Bachelor of Engineering with Honours (BE(Hons)).
To complete the specified programme in Materials and Process Engineering, students must complete the following programme.
Students who have completed ENGCB580 should contact the Division of Health, Engineering, Computing and Science for programme advice.
Other qualifications
Prescriptions for:
-
Year 1 Students must take the following papers: CHEMY102, ENGEN101, ENGEN102, ENGEN103, ENGEN110, ENGEN112, ENGEN170 and ENGEN180.
-
Year 2 Students must take the following papers: ENGCB223, ENGCB224, ENGCB280, ENGEN201, ENGEN270, ENGEN271, ENGME221, ENGMP211 and ENGMP213.
If you are studying the Diploma in Engineering Management, concurrent with the BE(Hons), you must complete ENGEN272 (in place of ENGEN271).
-
Year 3 Students must take the following papers: ENGMP214, ENGCB324, ENGCB380, ENGEN301, ENGEN370, ENGEN371, ENGMP311 and ENGMP313.
Plus 15 points of electives from: CHEMY201, CHEMY202, ENGCB321, ENGCB323, ENGCB327, ENGEN390, ENGEV341 or ENGME554.
If you are studying the Diploma in Engineering Management, concurrent with the BE(Hons), you must complete ENGEN372 (in place of ENGEN371).
-
Year 4 Students must take the following papers: ENGCB581, ENGEN570, ENGEN582 and ENGMP512.
Plus 30 points of electives (with no more than one 300 level paper) from: ENGCB321, ENGCB323, ENGCB327, ENGEV341, ENGCB521, ENGCB523, ENGEN585, ENGEV541, ENGEV542, ENGME554, ENGME585, ENGMP511 or ENGMP513.
-
MPhil The Master of Philosophy is a one year research-based degree in which students undertake a programme of approved and supervised research that leads to a thesis which critically investigates an approved topic of substance and significance, demonstrates expertise in the methods of research and scholarship, displays intellectual independence and makes a substantial original contribution to the subject area concerned, and is of publishable quality.
Materials and Process Engineering papers
| Code and paper title | Points | |
|---|---|---|
CHEMY102
Chemical Reactivity - Tauhohehohe Matū
A theoretical and practical course covering aspects of physical and organic chemistry. This course is required for the chemistry major. |
15 | 24B (Hamilton) |
|
ENGEN101
Engineering Maths and Modelling 1A
A study of the fundamental techniques of algebra and calculus with engineering applications. |
15 | 24A (Hamilton) & 24A (Secondary School - Unistart) & 24A (Tauranga) & 24B (Hamilton) |
|
ENGEN102
Engineering Maths and Modelling 1B
A further study of the fundamental techniques of algebra and calculus with engineering applications. Includes an introduction to relevant statistical... |
15 | 24B (Hamilton) & 24B (Secondary School - Unistart) & 24B (Tauranga) & 24G (Hamilton) |
|
ENGEN103
Engineering Computing
This paper introduces computer programming in languages such as the MATLAB and Python languages. It provides the basis for the programming skills... |
15 | 24A (Hamilton) & 24A (Tauranga) & 24G (Hamilton) |
|
ENGEN110
Engineering Mechanics
Statics and dynamics of rigid bodies. Application of freebody diagrams and equations of equilibrium to calculate internal and external forces and... |
15 | 24B (Hamilton) & 24B (Tauranga) & 24G (Hamilton) |
|
ENGEN112
Materials Science and Engineering
Introduction to engineering materials (metals, ceramics, polymers, composites, semiconductors and biomaterials) and their atomic structure and... |
15 | 24A (Hamilton) & 24A (Tauranga) |
|
ENGEN170
Engineering and Society
Introduction to the role of engineering in society with a focus on sustainable development, data analysis, holistic systems thinking, and the future... |
15 | 24A (Hamilton) & 24A (Tauranga) |
|
ENGEN180
Foundations of Engineering
Introduction to the engineering design process and computer aided design, fundamental principles of engineering analysis, open ended problem solving... |
15 | 24B (Hamilton) & 24B (Tauranga) |
| Code and paper title | Points | |
|---|---|---|
|
CHEMY201
Organic Chemistry
This paper covers aspects of organic chemistry including reaction mechanisms with carbanion and radical intermediates; mechanisms of reactions of... |
15 | 24B (Hamilton) |
|
CHEMY202
Physical Chemistry
This course covers aspects of physical chemistry including thermodynamics and phase equilibria; chemical kinetics; conductance and electrochemistry. |
15 | 24B (Hamilton) |
|
ENGCB223
Fluid Mechanics
This course covers the basic principles of fluid mechanics. Topics include fluid statics, fluid dynamics, Bernoulli and energy equations, momentum... |
15 | 24B (Hamilton) |
|
ENGCB224
Heat and Mass Transfer
This paper covers the fundamentals of heat and mass transfer analysis, including conduction, heat convection, radiation, molecular diffusion and mass... |
15 | 24B (Hamilton) |
|
ENGCB280
Process Engineering Design 1
This paper covers mass balances around reactors and separation processes used by engineers in process design, CAD tools for process flow diagrams... |
15 | 24B (Hamilton) |
|
ENGEN201
Engineering Maths and Modelling 2
Calculus of Several Variables and its Applications. Vector calculus (Green's, Gauss' and Stokes' theorems). Taylor's Theorem in n dimensions... |
15 | 24A (Hamilton) & 24H (Online) |
|
ENGEN270
Engineering and Business
This paper focuses on empowering students to become “business savvy” and prepared to enter the workplace and solve real-world problems. Topics... |
15 | 24B (Hamilton) |
|
ENGEN271
Engineering Work Placement 1
This paper is taken by students undertaking their first work placement for the BE(Hons). It involves 400 hours of engineering-related work... |
0 | 24X (Hamilton) |
|
ENGEN272
Engineering Work Placement 1
This paper is taken by students undertaking their first work placement for the BE(Hons) concurrent with the Diploma in Engineering Management or... |
30 | 24X (Hamilton) |
|
ENGME221
Engineering Thermodynamics
This paper covers the fundamental concepts and laws of thermodynamics, including thermodynamics properties of substances, first and second law... |
15 | 24A (Hamilton) |
|
ENGMP211
Materials 1
This paper will provide a foundation for understanding the relationship between material structure, processing and behaviour to support engineering... |
15 | 24A (Hamilton) |
|
ENGMP213
Mechanics of Materials 1
Analysis of skeletal structural members, supports and connections subject to single and combined loading. Calculation of displacements (translations... |
15 | 24A (Hamilton) |
|
ENGMP214
Materials Manufacturing Processes
This paper gives an understanding of fundamental principles and relationships between manufacturing processes and component microstructure and... |
15 | 24A (Hamilton) |
| Code and paper title | Points | |
|---|---|---|
|
ENGCB321
Thermal Engineering
Application of engineering thermodynamics to steady and unsteady industrial processes, including, steam boiler systems, advanced power and... |
15 | 24B (Hamilton) |
|
ENGCB323
Chemical Reaction Engineering
This paper is an introduction to the quantitative treatment of chemical and biological reaction and reactor engineering, including homogeneous and... |
15 | 24A (Hamilton) |
|
ENGCB324
Mass Transfer Operations
This paper covers the application of heat and mass transfer, and thermodynamics to chemical and physical separation process. |
15 | 24A (Hamilton) |
|
ENGCB327
Food and Bioprocess Engineering
Food and Bioprocess operations play a key role in the manufacture of products such as dairy and meat products, vaccines, food and the like at... |
15 | 24B (Hamilton) |
|
ENGCB380
Process Engineering Design 2
Conceptual and detailed design, costing and economic assessment of chemical, biological and materials process plants, including software and... |
15 | 24B (Hamilton) |
|
ENGEN301
Engineering Maths and Modelling 3
Introduces numerical methods and statistical ideas relevant to Engineering. |
15 | 24A (Hamilton) |
|
ENGEN370
Engineering and the Environment
This paper covers sustainability in engineering design and renewable energy generation through the critical lens of environmental impact assessment... |
15 | 24A (Hamilton) |
|
ENGEN371
Engineering Work Placement 2
This paper is taken by students undertaking their second work placement for the BE(Hons). It involves 400 hours of engineering-related work... |
0 | 24X (Hamilton) |
|
ENGEN372
Engineering Work Placement 2
This paper is taken by students undertaking their second work placement for the BE(Hons) concurrent with the Diploma in Engineering Management or... |
30 | 24X (Hamilton) |
|
ENGEN390
Special Topics in Engineering 1
An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff. |
15 | 24X (Hamilton) |
|
ENGEN391
Special Topics in Engineering 2
An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff. |
15 | 24X (Hamilton) |
|
ENGEV341
Environmental Engineering 2
This paper covers the design, operation and management of unit processes used in environmental engineering including air, water, wastewater, storm... |
15 | 24B (Hamilton) |
|
ENGMP311
Materials 2
It will develop understanding of the relationship between material structure, processing and behaviour to support engineering of materials and... |
15 | 24B (Hamilton) |
|
ENGMP313
Mechanics of Materials 2
Advanced level knowledge on mechanics and performance of materials, covering stress and strain transformations, failure criteria, unsymmetrical... |
15 | 24B (Hamilton) |
| Code and paper title | Points | |
|---|---|---|
|
ENGCB521
Advanced Process Control
This paper covers the fundamentals of process control, and introduces advanced process control strategies. |
15 | 24A (Hamilton) |
|
ENGCB523
Advanced Energy Engineering
Application of engineering thermodynamics, process integration and pinch analysis to energy systems including renewable energy systems and energy... |
15 | 24B (Hamilton) |
|
ENGCB581
Advanced Process Engineering Design
Design teams will design a processing plant to meet the specifications of a design brief including mass and energy balances, economic evaluation and... |
15 | 24A (Hamilton) |
|
ENGEN508
Master's Capstone Project
This paper requires students to carry out a theoretical or empirical investigation in a relevant subject/engineering discipline and write a report on... |
60 | 24X (Hamilton) |
|
ENGEN570
Engineering and the Profession
The roles and responsibilities of professional engineers are examined. Topics include; project management, leadership, negotiation, ethical... |
15 | 24D (Hamilton) |
|
ENGEN582
Honours Research and Development Project
This paper provides the "capstone" project required to complete an accredited engineering degree. The paper builds on the knowledge and skills... |
45 | 24X (Hamilton) & 24X (Tauranga) |
|
ENGEN583
Special Topics in Engineering 3
An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff. |
15 | 24X (Hamilton) |
|
ENGEN584
Special Topics in Engineering 4
An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff. |
15 | 24X (Hamilton) |
|
ENGEN585
Special Topics in Engineering 5
An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff. |
15 | 24X (Hamilton) |
|
ENGEN586
Special Topics in Engineering 6
An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff. |
15 | 24X (Hamilton) |
|
ENGEN587
Directed Study 1
Students have the opportunity to pursue a topic of their own interest under the guidance of academic staff. |
30 | 24X (Hamilton) |
|
ENGEN588
Directed Study 2
Students have the opportunity to pursue a topic of their own interest under the guidance of academic staff. |
30 | 24X (Hamilton) |
|
ENGEV541
Advanced Water and Wastewater Engineering
This course covers advanced aspects of design and operation of unit processes in water and waste water treatment, and process modelling and... |
15 | 24A (Hamilton) |
|
ENGEV542
Waste Minimisation Engineering
Design of processes for the handling, recycling, reuse, treatment and disposal of domestic and industrial solid wastes including treatment plant... |
15 | 24A (Hamilton) |
|
ENGME554
Inspection, Monitoring and Evaluation
Inspection and monitoring are techniques used to provide evaluation of the current health of a component or system. This paper covers the... |
15 | 24B (Hamilton) |
|
ENGME585
Industrial Technology and Innovation 1
Using Project Based Learning, this paper will furnish the student with an understanding of the innovation and product development process. It will... |
15 | 24A (Hamilton) |
|
ENGMP506
Materials and Process Systems Analysis
This paper covers mass and heat transfer, thermodynamics, materials (including metal, polymer and composites) processing and the relationship between... |
30 | 24A (Hamilton) & 24B (Hamilton) |
|
ENGMP512
Advanced Materials Manufacture
This paper deals with advanced materials science knowledge and principles underlying materials engineering. It focuses on the relationships between... |
15 | 24A (Hamilton) |
|
ENGMP516
Materials Characterisation
This paper covers the basic theory and use of advanced analytical techniques used in materials characterization using optical microscopy, x-ray... |
15 | 24B (Hamilton) |
-
CHEMY102 Chemical Reactivity - Tauhohehohe Matū
A theoretical and practical course covering aspects of physical and organic chemistry. This course is required for the chemistry major.
He pepa...Points 15A study of the fundamental techniques of algebra and calculus with engineering applications.
Points 15A further study of the fundamental techniques of algebra and calculus with engineering applications. Includes an introduction to relevant statistical...
Points 15This paper introduces computer programming in languages such as the MATLAB and Python languages. It provides the basis for the programming skills...
Points 15Statics and dynamics of rigid bodies. Application of freebody diagrams and equations of equilibrium to calculate internal and external forces and...
Points 15Introduction to engineering materials (metals, ceramics, polymers, composites, semiconductors and biomaterials) and their atomic structure and...
Points 15Introduction to the role of engineering in society with a focus on sustainable development, data analysis, holistic systems thinking, and the future...
Points 15Introduction to the engineering design process and computer aided design, fundamental principles of engineering analysis, open ended problem solving...
Points 15 -
CHEMY201 Organic Chemistry
This paper covers aspects of organic chemistry including reaction mechanisms with carbanion and radical intermediates; mechanisms of reactions of...
Points 15This course covers aspects of physical chemistry including thermodynamics and phase equilibria; chemical kinetics; conductance and electrochemistry.
Points 15This course covers the basic principles of fluid mechanics. Topics include fluid statics, fluid dynamics, Bernoulli and energy equations, momentum...
Points 15This paper covers the fundamentals of heat and mass transfer analysis, including conduction, heat convection, radiation, molecular diffusion and mass...
Points 15This paper covers mass balances around reactors and separation processes used by engineers in process design, CAD tools for process flow diagrams...
Points 15Calculus of Several Variables and its Applications. Vector calculus (Green's, Gauss' and Stokes' theorems). Taylor's Theorem in n dimensions...
Points 15This paper focuses on empowering students to become “business savvy” and prepared to enter the workplace and solve real-world problems. Topics...
Points 15This paper is taken by students undertaking their first work placement for the BE(Hons). It involves 400 hours of engineering-related work...
Points 0This paper is taken by students undertaking their first work placement for the BE(Hons) concurrent with the Diploma in Engineering Management or...
Points 30This paper covers the fundamental concepts and laws of thermodynamics, including thermodynamics properties of substances, first and second law...
Points 15This paper will provide a foundation for understanding the relationship between material structure, processing and behaviour to support engineering...
Points 15Analysis of skeletal structural members, supports and connections subject to single and combined loading. Calculation of displacements (translations...
Points 15This paper gives an understanding of fundamental principles and relationships between manufacturing processes and component microstructure and...
Points 15 -
ENGCB321 Thermal Engineering
Application of engineering thermodynamics to steady and unsteady industrial processes, including, steam boiler systems, advanced power and...
Points 15This paper is an introduction to the quantitative treatment of chemical and biological reaction and reactor engineering, including homogeneous and...
Points 15This paper covers the application of heat and mass transfer, and thermodynamics to chemical and physical separation process.
Points 15Food and Bioprocess operations play a key role in the manufacture of products such as dairy and meat products, vaccines, food and the like at...
Points 15Conceptual and detailed design, costing and economic assessment of chemical, biological and materials process plants, including software and...
Points 15Introduces numerical methods and statistical ideas relevant to Engineering.
Points 15This paper covers sustainability in engineering design and renewable energy generation through the critical lens of environmental impact assessment...
Points 15This paper is taken by students undertaking their second work placement for the BE(Hons). It involves 400 hours of engineering-related work...
Points 0This paper is taken by students undertaking their second work placement for the BE(Hons) concurrent with the Diploma in Engineering Management or...
Points 30An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff.
Points 15An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff.
Points 15This paper covers the design, operation and management of unit processes used in environmental engineering including air, water, wastewater, storm...
Points 15It will develop understanding of the relationship between material structure, processing and behaviour to support engineering of materials and...
Points 15Advanced level knowledge on mechanics and performance of materials, covering stress and strain transformations, failure criteria, unsymmetrical...
Points 15 -
ENGCB521 Advanced Process Control
This paper covers the fundamentals of process control, and introduces advanced process control strategies.
Points 15Application of engineering thermodynamics, process integration and pinch analysis to energy systems including renewable energy systems and energy...
Points 15Design teams will design a processing plant to meet the specifications of a design brief including mass and energy balances, economic evaluation and...
Points 15This paper requires students to carry out a theoretical or empirical investigation in a relevant subject/engineering discipline and write a report on...
Points 60The roles and responsibilities of professional engineers are examined. Topics include; project management, leadership, negotiation, ethical...
Points 15This paper provides the "capstone" project required to complete an accredited engineering degree. The paper builds on the knowledge and skills...
Points 45An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff.
Points 15An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff.
Points 15An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff.
Points 15An independent theoretical literature or experimental investigation of an engineering topic supervised by a member of staff.
Points 15Students have the opportunity to pursue a topic of their own interest under the guidance of academic staff.
Points 30Students have the opportunity to pursue a topic of their own interest under the guidance of academic staff.
Points 30This course covers advanced aspects of design and operation of unit processes in water and waste water treatment, and process modelling and...
Points 15Design of processes for the handling, recycling, reuse, treatment and disposal of domestic and industrial solid wastes including treatment plant...
Points 15Inspection and monitoring are techniques used to provide evaluation of the current health of a component or system. This paper covers the...
Points 15Using Project Based Learning, this paper will furnish the student with an understanding of the innovation and product development process. It will...
Points 15This paper covers mass and heat transfer, thermodynamics, materials (including metal, polymer and composites) processing and the relationship between...
Points 30This paper deals with advanced materials science knowledge and principles underlying materials engineering. It focuses on the relationships between...
Points 15This paper covers the basic theory and use of advanced analytical techniques used in materials characterization using optical microscopy, x-ray...
Points 15
2024 Catalogue of Papers information current as of 23 Nov 2024 01:00am